Service Manual of Micromax X2i

  • PDF

Micromax X2i User and Service Manual

Getting Started

Packing Contents

Before using Micromax X2I mobile phone, carefully remove the contents from shipping carton and check for any damages or missing contents. If found any, contact your Authorized Distributor or Shipping agent immediately. The standard packing contents are as follows:


  • Base Trans-receiver

  • Standard Battery(1800mAh)

  • User Guide

  • Service Guide

  • Charging Adaptor

  • Hands-Free Unit

      1. Installing SIM, Battery and Attaching other Accessories


        SIM Card & Battery Installation (Figure 2)

        Always turn off the phone and detach the charger when you insert or remove a SIM card or Battery from the phone.

        1. Remove the battery cover by sliding it as shown in Figure 2.


        2. Slide the SIM Cards into their holder. Make sure that gold contacts of the SIM Cards are facing down, and the cut off corner is correctly aligned as shown in figure.


        3. Place the battery in the back of the phone with the label side up and the connectors facing each other.

        4. Place the battery cover as shown in the picture and slide it into place.

        5. Memory Card Installation (Ref Figure 2)

          The Memory Card gives you extra storage capacity for content such as pictures, music and video clips. To install:

          1. Remove the battery cover by sliding and remove the battery as shown.


          2. Slide open the memory card cover as shown and place the card inside the slot.


          NOTE: Do not remove the memory card while reading or writing to the card. Doing so may cause data corruption on the card or on the phone.


          Connecting Hands-free Kit (Ref Figure 3)

          You are provided with hands-free earpiece set with your phone. The same can be used to listen to your mp3 songs and listen and speak while on a call. To connect the hands-free earpiece, simply connect the connector into the connecting socket as shown in figure. When properly connected, the phone will display a message ‘Earphone Plugged In!’ with an icon displayed on top of the screen.


          NOTE: Only use Micromax specified accessories.

          Connecting the charger/Charging the Battery (Ref Figure 4)

          1. Plug the charger’s transformer into a standard AC outlet.


          2. Insert the charger’s output plug into the phone’s connecting socket as shown in figure.


          NOTE: It may take up-to 30 minutes before the battery icon/charging icon appears on the screen when charging.


          Powering ON and OFF the Phone

          To Power your phone ON or OFF, press and hold the End (RED) key for at least 3 seconds or until the display lights up or goes off. Enter the lock code if necessary and select OK to Power ON.



      2. Phone Keypad Layout (Figure 5)


        Left Soft Key

        Performs functions in lower left display. In standby mode, press OK key to open shortcut functions

        Right Soft Key

        Performs functions in lower right display.


        Call Key

        • Make calls

        • Answer calls

        • Press when idle to see the list of calls.

          End Key

          End or reject calls; Press and hold this key to turn phone on/off.


          Up and Down Direction Keys

        • Scroll to select options

        • In standby mode press to open corresponding applications.

        • In edit message status, press to select the required word.

        • In function menu, scroll to open corresponding function.


          Left and Right Direction Keys

        • Scroll to select options

        • In standby mode press to open corresponding applications

        • In edit message status, press to select the required word.


          0-9 Keys

          In standby mode, press number keys to input dialing number. In standby mode, press and hold 1-8 key to directly call the number set before, in the speed dial list. In edit status, press to input numbers, characters and phonetic notation. In edit mode, except input number, press 0 key to input space. In functional menu, press numbers to speed select submenu items.


          * & # Key

          Functions vary in different situations or function menus: On Input Screen, press "*" for symbols. On Input Screen, press "#" to switch between different inputting methods. In standby and dial mode, press and hold "*" to input +. In standby mode,

          input "+" for an international call.


      3. Important Phone Icons


        Signal Strength Icon

        The Signal Strength Icon is seen on the top leftmost corner of the screen. The icon helps you to identify the strength of the network; the phone has latched on to, at

        that particular instance. It has a maximum of 4 bars and with a minimum as no bar.

        4 bars signify strongest network strength and subsequently minimizes with each diminishing bar. No bar signifies least or no network strength.


        Battery Meter Icon

        The Battery Meter Icon is seen on top rightmost corner of the screen. The icon signifies the battery strength available at that instance. The icon will signify the maximum battery strength by 3 bars and no bar will signify least battery strength.


        NOTE: At very low battery levels, the phone will prompt ‘Low Battery’ message on the screen.

        Keypad Lock Icon

        The Keypad Lock Icon is seen on top of the screen at various positions depending on the number of icons displayed. An Open Lock signifies that the phone’s keypad is unlocked and a closed lock signifies that the keypad is locked. You can unlock the keypad by pressing Unlock (by right soft key) on the phone, followed by the Send (GREEN) key. Similarly for locking the keypad, press the End (RED) key, to be followed by the Send key.



      4. Basic Functions


        Make a Call

        To make a call, unlock the keypad, if locked, enter the desired phone number, press the Send (GREEN) key and select the appropriate SIM.

        NOTE: Your service provider programs one or more emergency phone numbers, such as 112, 100, that you can call under any circumstances, even when your phone is locked or the SIM card is not inserted. Check with your service provider, as emergency numbers vary by country. Your phone may not work in all locations, and sometimes an emergency call cannot be placed due to network, environmental or interference issues.


        Making a Call Using Call Logs

        All dialed and incoming numbers are saved in call logs and categorized into Missed Calls, Received Calls and Dialed Calls. To check the logs, please follow these steps:

        In standby mode, press the Send (GREEN) key to view Call Logs. Use the scroll keys to scroll between Missed Calls, Received Calls and Dialed Calls.


        Or else, you can go to Call Logs>Call History>Select the appropriate SIM to view the missed, received and dialed calls.


        Answering a Call

        • To receive an incoming call, press the Option key and select ‘Answer’ or receive it directly by pressing the Send (GREEN) key.

        • If headset is available, user can choose headset keys to answer the call or turn on auto answer.


          Call Option

          The Micromax X2i phone offers multiple functions during a call. During a call, following functions can be actualized if you operate according to the instructions on the screen. Press up and down direction keys to choose the wanted function and press select key to enter.


        • Hold a Call: To hold an Active call.

        • Swap between Held/Waiting and Active: Swap among the calls. This option is network dependent.

        • End: End the present active call only.

        • New call: To make a new call.

        • Phone Book: To explore the Phonebook for phone numbers.

        • Message: To explore the SMS menu (Inbox, outbox, etc)

        • Sound Recorder: To record the present active call for later listening/review.

        • Mute: Turn off the Microphone during an active call.


        • DTMF (Dual-tone Multi-frequency): You can choose on/off; which is to send dual-tone multi-frequency sound. This can offer dialing to the telephone numbers with extensions or IVR systems installed for menu driven options.


        • Conference: By multi-way conferencing, you can answer an incoming call and add new participants according to the prompt. Keep the ongoing multi-way conference, have a private conversation while keeping all the others on hold, get through one participant with another one, quit yourself from the conference.


          NOTE: This feature is network dependent.


      5. Menu Layout

    • Contacts

      • Quick Search

      • Search Entry

      • Add New Entry

      • Multi Operation

      • Import & Export

      • Caller Group

      • Settings

    • Messages

      • SMS

      • MMS

      • Chat

      • Voice Mail Server

      • Broadcast Message

      • Voice MMS

    • Call Logs

      • Call History

      • Missed Call Alert

      • Speed Dial

      • Call Settings

    • Organizer

      • Calendar

      • Alarm

      • To Do List

      • World Clock

    • Services

      • STK

      • WAP

      • Data Account

    • Settings

      • Reception Mode

      • Time and Date

      • Display Setup

      • Phone Setup

      • User Profiles

      • Network Setup

      • Restore Factory Settings

    • Multimedia

      • Image Viewer

      • Camera

      • Video Player

      • Video Recorder

      • Audio Player

      • FM Radio

      • Sound Recorder

    • Extras

      • File Manager

      • Converter

      • Calculator

    • Applications

      • Games

      • Game Settings


  1. Function Menu


      1. Contacts


        Quick Search:

        Quick search allows you to quickly search an entry in the Phonebook by entering the key letters or words of the name. After finding the desired number the user gets the

        following options:


        • Dial: Selecting the option will dial the number found by quick search.

        • Send SMS: Selecting this option will enable the user to send an SMS on the number selected.


        • Send MMS: Selecting this option will enable the user to send an MMS on the number selected.

        • View: View option gives you the details of the number selected.

        • Edit: Edit option gives you the option to edit the details of the selected number. The details include- Name, number, Home number etc.

        • Add New Entry: Selecting this option will enable you to add a new entry in the Phonebook.

        • Delete: The option allows you to delete the selected entry.


        • Copy: The option allows you to Copy the entry selected to the phone or to the SIM card depending on where the entry was stored before.

        • Move: The option allows you to move the entry from Phone to SIM or from SIM to phone depending on where the entry was selected from. The moving entry will be automatically deleted from the last storage device.


        • Duplicate: The duplicate option enables you to duplicate the same entry in the same storage device (Phone or SIM) depending on the last storage device.


        • Send vCard: This option is same as ‘send Business Card’. It will enable you to send a business card of the selected entry as an SMS.


          Search Entry:

          Unlike Quick search, Search option enables the user to search an entry by its complete name.

          Add New Contact:

          Select this option in order to add a new entry into the SIM memory or to the phone memory.


          Multi Operation:

          Multi Operation has the following options



        • Select All from SIM: This option allows you to select all the entries stored in the SIM. After selecting the desired entries, you can Copy or Delete them as per requirement.


        • Unselect All from SIM: This option allows you to unselect all the entries stored in the SIM. After selecting the desired entries, you can Copy or Delete them as per requirement.


        • Select All from Phone: This option allows you to select all the entries stored in the Phone. After selecting the desired entries, you can Copy or Delete them as per requirement.


        • Unselect All from Phone: This option allows you to unselect all the entries stored in the SIM. After selecting the desired entries, you can Copy or Delete them as per requirement.


          Import and Export:

          Selecting this entry would enable you to import and export your contacts from phone memory card or vice versa in different styles (Phone Suite Style/Outlook Style/Text Style).


          Caller Group:

          Caller Group contains five default groups:


        • Friends

        • Family

        • VIP

        • Business

        • Others

          Selecting any group allows you to edit the options available with it. For example:

          • Setting the ring tone associated with the group.

          • Picture associated with the group.



            The following fields are listed under settings:


        • Memory Status: This option enables you to check the memory status of the phone and the SIM card.

        • Preferred Storage: This option allows you to select your preferred memory storage between SIM and Phone memory.

        • Extra Number: It has the following options to edit

          • Owner Number

            Owner Number lets you input your own phone number and name. If set to ON, the phone’s main screen displays the name or your number on

            the screen.

            NOTE: This is a SIM Card dependant service.


          • SOS Number

          The phone gives you an option to store 5 numbers for contacting in case of any emergency


        • Fields: Gives you an option to select the fields to be edited at the time of a adding a new entry in the Phone book. The fields include:

          • Home Number

          • Company Name

          • Email Address

          • Office Number

          • Fax Number

          • Birthday

          • Associate Picture

          • Associate Sound

          • Caller Group

        • My vCard: My vCard gives you an option to edit and send your business card to the selected recipients.

        • vCard Version: The phone gives you 2 vCard Versions.


      2. Messages

        Your phone supports various messaging services. You can create, send, receive, edit and organize text messages.

        Messages contain the following folders:


        • SMS

        • MMS

        • Chat

        • Voice Mail Box

        • Cell Broadcast



          Under SMS, the phone has the following folders listed.

        • Inbox: This folder stores all the received messages.

        • Outbox: This folder contains all the messages sent from your phone as well as the unsent messages.


        • Write Message: On selecting Write Message, the screen will pop up to ask you to input the contents of the message using different input methods (Templates, Insert Number, Insert Object etc).


        • Drafts: This folder stores the unsent messages.


        • Templates: Templates stores 10 preloaded/pre-written text messages for ready usage. You can edit the templates according to your wish and also store the messages that you send more often.


        • Message Settings: Message settings stores all the different settings responsible for sending and receiving messages.

          • Profile Setting: It contains 4 default profiles which includes Profile name, Service Centre Address, Validity Period and Message type.


          • Common setting: These settings include the following - Delivery Report and Reply Path

          • Memory Status: Memory status gives you the information about the storage status of the phone memory as well as the SIM memory.

          • Preferred Storage: Lets you select the default storage location of the messages between Phone and SIM.



          The phone has the capability to support Multi Media Services. You can send and receive multimedia files by using this feature, provided, you have this service activated on your SIM card. It has the following folders listed:


          Write Message Inbox



          Draft Template



          Chat enables you to enter 2 different user’s default settings (Chat Room 1 and Chat Room 2) to enable sending and receiving the messages. Chat option enables you to see the complete conversation on a single window as in a messenger window.


          Voice Mail Server:

          The Voice Mail is an interactive system for storing, processing and reproducing verbal messages through a voicemail server. The service is operator dependant and the settings are provided by the operator upon activating the service on the SIM card.


          Broadcast Message:

          Your phone is capable to receive and store broadcast messages. You can set the receive status to ON/OFF. Read Message folder stores the received messages.

          Note: Broadcast messages are received through a predefined channel-050.


          Voice MMS:

          Using this option you can send a Voice MMS after recording the desired sound using the sound recorder.


      3. Call Logs

        Calls Logs gives you the following options:


        • Call History: You can check the missed calls, received calls, dialed calls etc.

        • Missed Call Alerts: You can set the phone to remind you with a tone whenever you have an unattended missed call.

        • Speed Dial: Set the desired entries corresponding to the digits from 1 to 9. once set, you can long press the corresponding key to call the desired


        • Call Settings


      4. Organizer


        You can use the calendar to keep track of important meetings. After entering the calendar function menu you can select year, month and date using direction keys.

        On a selected date you can select to view:


        • View Tasks: If there is a special background color on a date which means there is some task on that day. You can also view any Note / Remark mentioned by you for a task stored by you previously.


        • Add Task: When you add a new task, you can do the following:

          • Input task duration time. o Add a Note for that task. o Set alarms on/off.

        • Jump to date: Input a date, and then press OK to go to a specific date for entry/edit/viewing of task for that date.

        • Go to Weekly View: Select this option to view tasks in weekly format.



          The Alarm can be set to ring at a specific time on several days. There are five different default alarms. You can set these alarms to alarm you at different time in specific day(s) of a week. The alarm can use radio as an alarm tone also.


          To set an alarm:


        • Press edit to enter alarm settings menu.

        • Select edit option using up and down direction keys

          • ON/OFF: Select alarm on or off using left and right direction key

          • Alarm time: Input alarm time

          • Repeat Setting: Press left and right direction keys to select alarm types which consists of one time, everyday and weekdays.

          • Snooze: To set Snooze duration in minutes.

          • Alarm Type: To select between Ring/Vibrate combinations.


To Do List

All tasks saved in calendar, can be viewed in To-Do list.


World Clock

World clock can be used to know the time in various cities across the world. You can see a world map and instantaneous time in those cities using world clock. Enter world clock to view world cities time using the direction keys.


Schedule Power ON/OFF

As the name suggests, this option allows you to Power ON/OFF your phone as per a predefined schedule. You are given 4 different options to schedule.


    1. Services



      STK stands for SIM Tool Kit. Please contact your service provider for more details.


      WAP or Wireless Application Protocol browser provides all the basic services of a computer based web browser but simplified to operate within the restrictions of a mobile phone. The WAP Browser has the following options:


      • Homepage: Homepage allows you to enter the default URL on the phone.

        This will enable you to go to the same page every time you access the homepage.


      • Bookmarks: Bookmarking enables you to mark a place in an electronic document or a pointer (primarily to an internet URL) in an Internet web


      • Recent Pages: Recent Pages stores the list of URLs which have been recently visited by you on the WAP browser.

      • Enter Address: Enter the desired address (URL) of the website or webpage in this column.

      • Service Inbox: Service Inbox receives and stores URLs through text messages from the operator. You can read them and accept to go to the

        web page and browse.

      • Settings: You can vary the following settings:

        • Edit Profile: You can edit the different profiles listed and stored under WAP profiles.

        • Browser Options: Browser option enables you to edit the Time out seconds and Show Images options. You can change the Time out timing of the page and enable or disable images on the web page.

        • Service Message Settings: You can set them to ON/OFF. Set it to ON/OFF to enable or disable receiving service messages.

        • Clear Cache: Select to clear/delete the cache memory of the phone.

        • Clear Cookies: Select to clear/delete the cookies or temporary files

          stored in the phone.


          Data Accounts

          Data Accounts contain two types of accounts used to establish GSM/GPRS connections for WAP, MMS and WWW browsing.

          GSM Data GPRS Data.

          NOTE: Select the appropriate setting from the list for using a particular feature depending on the availability of the operator services. Data Accounts contain two types of accounts used to establish GSM/GPRS connections for WAP, MMS and WWW browsing.

          1. GSM Data

          2. GPRS Data


    2. Settings

      Under settings, the phone gives you the option to change the settings for various features of the phone.

      The following list is available in Settings:


      Reception Mode

      The Reception Mode allows you to select the mode in which you want the phone to be. The Modes of the Phone are:

      • Dual SIM Active


        This mode allows you to access the services of both the SIM’S i.e. Dual SIM Dual Standby.

      • Only SIM1 Active

        Only the SIM1 is functional whereas the SIM2 is not accessed.

      • Only SIM2 Active

        This mode is used to enable the situation where you want only the SIM2 to be functional.

      • Flight Mode

        This mode is used to set the phone in Flight Mode. In this mode the phone will be out of signal reception but you will be able to use other functions of the phone in standby mode.


        Time and Date

        Lets you set the Time and Date on the phone including the Home City.


        • Auto Update of Date & Time: This feature automatically updates the date and time on the phone, receiving it from the network.

          Note: This feature is network dependant.


          Display Setup


          Under Display characteristics, you can set a host of different characteristics of the phone. Like

          • Wallpaper – Set your favorite wallpaper on the phone

          • Screen Saver – Lets you set an image as a screen saver.

          • Power ON Display – Lets you select a pre-defined animation.

          • Power OFF Display - Lets you select a pre-defined animation.

          • Show Date and Time – Enables you to see the date and time on the idle screen.

          • Show Owner Number – It helps you set your own number on the display for your ready reference.


          • Show Operator Name – You can put this to ON/OFF state. It lets you see the Operator name on the idle screen

          • Greeting text - Lets you set your own greeting message when you power ON the phone.


          • LCD Backlight – Allows you to set the parameters for the LCD Brightness etc.


            Phone Setup

            You have following options listed under phone settings:


        • Language: The Micromax X4u currently supports only English language.


        • Preferred Input Method: This enables you to select the text input method from 5 options. They are – Multitap ABC, Multitap abc, Numeric, Smart ABC, Smart abc.

        • Shortcuts: Shortcuts help you use certain key features of the phone instantly. You can choose the features at your own wish and set them in the menu. You can add new features to the list, delete, edit, disable and change the order.


        • Dedicated Key: This option helps you dedicate/map certain key features of the phone with the Directional keys (UP/DOWN/LEFT/RIGHT) of the phone. At anytime you can change the mapping and select a new feature from the list of features available.

          User Profiles

          All the different profiles are listed under this option:


          General: The Profile gives you an option to activate and customize the settings. You can customize the following features:

          Tone Setup: Tone Setup enables you to set up different music tones to different functionalities of the phone like, Incoming Call, Power ON, Power OFF, Message Tone and Keypad tone.

          Volume: You can vary the volume levels for Ring Tone and Key Tone.

          Alert Type: Alert Type lets you choose the way you want to be alerted. You can choose from, Ring, Vibration only, Vibration and Ring, Vibration then Ring and Light only.

          Ring Type: Ring Type lets you select the type of ring to alert you. You can choose from Single, Repeat and Ascending.

          Extra Tone: Extra Tone is added to a number of incidences such as Warning, Error, Camp On and Connect.

          Answer Mode: Answer Mode gives you the choice to select Any key answer mode. Any key enables you to receive a call using any key of the phone except the End (RED) key.

          Status LED: Status LED pattern can be chosen from 6 different color patterns.

          Meeting: These modes are similar to General Mode and can be customized according to your own preference.

          Outdoor: These modes are similar to General Mode and can be customized according to your own preference.

          Indoor: These modes are similar to General Mode and can be customized according to your own preference.

          Headset: These modes are similar to General Mode and can be customized according to your own preference.

          Bluetooth: These modes are similar to General Mode and can be customized according to your own preference.

          Power Save: Activate this mode to set your phone on a power saving mode.

          Network Setup

          Network setup gives the user the ability to select a desired network and addition of a new network to the network list. The network setup gives you the follow options:

        • Network Selection (Automatic/Manual)

        • Preferred Networks – Will list down all the network IDs (depending on the SIM card used)

        • GPRS Connection (When needed/Always)- Alter the selection to select between “When Needed” and “Always” to use the GPRS services.


          Flight Mode – Gives you an option to choose the mode in which you wish to operate the mobile phone. (Flight Mode, Normal Mode and Query on Power ON).


          Security Setup

          Under Security Setup, you can change the security settings of SIM1 or SIM2.


        • SIM Lock: SIM Lock protects illegal usage of the SIM card. SIM is protected by a password.

        • Phone Lock: Phone Lock protects your phone from any unauthorized usage or unauthorized access to information stored in the phone. When phone lock is activated, the phone would ask for the phone lock code every time you power-on the phone. Enter the lock code to use the phone. You can simply unlock the phone by going into security settings, Phone Lock, enter the lock code and put it off.


        • Auto Keypad Lock: Auto Keypad lock automatically locks the keypad after a preset interval of time. You can set the time from 1 second to 1 minute.


        • Fixed Dial: Outgoing calls from your phone can be restricted by making a fixed dialing list that allows only numbers on that list to be dialed from the phone.


        • Barred Dial: Barred Dialing is a SIM card/Network dependant feature If your operator supports it, then you can use the facility in the phone.

          Change Password: Change Password option gives you the options to change PIN, PIN2 and Phone Lock password

        • Phone Lock: You can set the “Auto Keypad Lock”, “Phone Lock” and can also change the Phone Lock Password.


        • Self Help: Self Help is a unique feature that helps you in an emergency situation to contact on any predefined number without having to dial that number. State: You can put it to ON/OFF state.


          Number List: You can save as many as 5 numbers in the list. Ensure that these numbers have the facility to receive an SMS.

          Self Help Content: You can edit the contents of the SMS that will send to the emergency number list.

          Note: When an SMS is sent to the emergency numbers set, the MCC-MNC, LAC ID and the BTS ID of the place you are in are also sent along. This ensures that the SMS receiver can easily track down your coordinates.


          Restore Factory Settings

          Selecting this option will ask you to enter the password to restore the phone to factory settings


    3. Multimedia

      The Micromax X2I comes with a host of multimedia applications to provide you with unlimited entertainment.

      Image Viewer:

      Image Viewer stores all your pictures which are preloaded as well as those taken by the phone camera. It gives you the options.

        • View – To view the selected file.

        • Browse Style – Gives you an option to store your images in List or Matrix style.

        • Rename – You can rename the image according to your own choice.

        • Delete – To delete the selected file or all files.

        • Delete All Files

        • Sort – The images stored can be sorted by Name, Type, Time and Size.



          The Micromax X2i comes with a digital camera to take pictures and record videos. It has a number of setting options to capture quality images.

        • Camera Settings

          • Banding – To select between 50Hz and 60 Hz band.

          • Delay Timer – Delay Timer enables you to set the time (Off, 5sec, 10sec, 15sec) before a picture is taken after pressing the capture key.


          • Cont Shot – If selected the camera will start taking pictures in the continuous mode, one after the other. It can be set for taking 1, 3 or 5 shots at a time.


        • Image Settings


          • Image Quality – Image quality can be set as High, Normal and Low to save space in memory as a Low quality images takes less space.

          • Image Size – The size of the image can be varied from 128*96 to 352*288.

        • Scene Mode


          Scene mode can be selected between Auto or Night depending on the light availability at that time.

        • Restore Default – The Camera settings can be set to default.


          Video Player:

          The Video Player plays all your video files stored in the phone (Phone Memory or on the Memory Card). The video player gives you the following options:

        • Play – To start playing the video file.

        • Rename - To rename an already saved file.

        • Delete – To delete an existing file.

        • Delete All Files – To delete all files at once.

        • Sort – To sort the already saved files by Name, Type, Time and Size.

          Video Recorder

          You can record all your precious moments with the Micromax X2I’s digital camera. The recorder not only records videos but also gives you the power to enhance the quality of the picture using its different settings.


        • Camcorder Settings – This includes White Balance (Auto / Daylight / Tungsten / Fluorescent / Cloud etc, LED light (ON/OFF), Exposure Value, Night Mode etc.

        • Restore Default – This option restores the original settings of the Video Recorder.


          Audio Player

          The Micromax X2I comes with an inbuilt audio player that plays all your favorite songs stored in the micro SD memory card. It gives you a host of setting options to make your listening experience interesting.

          The player gives you an option to select from a list of songs already stored in the memory card, to be played, added to your ring tones or deleted.

          The player has the following setting options:


          • List Auto Gen: It also offers to generate the play list automatically.

          • Repeat: You can also select to repeat the song or complete play list (Off/One/All).


          • Shuffle: You can shuffle the order of your songs to be played. If you put this mode ON, then the songs will be played in a random fashion otherwise, a sequential pattern will be followed.


          • Back Ground Play: Back Ground play option allows you to enjoy your music even if the player is minimized to use other functions of the phone.


            Sound Recorder

            You can record sound/voice on your Micromax X2I phone. Just select sound recorder, go to options and press record. Select Stop to rename the file and save it. Select pause to ‘pause’ the recording and ‘continue’ to resume the recording.


            FM Radio

            The Micromax X2I comes with an in-built FM Radio Receiver. Press Options to find:


        • Channel List: Store all the channels that the FM Radio can receive. You get options to play or edit them.

        • Manual Input: You can store and register your channel frequency and play it by pressing OK.

        • Preset Auto Search: On selecting this, the FM tries to scan all the available channels provided by the network. To start the search, make sure that the radio is powered ON.

        • Settings: Under settings, you have options for Back Ground Play (ON/OFF), Loud Speaker (ON/OFF).

      The FM Radio also gives you an option to change the settings through short-cut keys available on the main window. Such as ‘To Power ON’, to ‘Skip to next channel’ and to ‘skip to previous channel’ using the digit keys on the keypad.

    4. Extras


      File Manager

      As the name suggests, File manager allows you to manage all the files stored in the external memory card.


      You can view the remaining memory and available memory in phone and micro-SD card.

      You can open and navigate the directories and files in the storage. You can View, Play and Setup files in the storage disks.



      Make your calculations/conversions simpler and accurate.



      Keep your calculations on your finger tips with the easy to use calculator.


    5. Applications


To win the game the player has to move the designed boxes to the appointed locations. The player controls the man who stands by the box via navigation keys

(Up, Down, Right or Left) or the number keys (2, 8, 4 and 6). To cancel the previous move, press number key 5, OK key or left function key.


Game Setting:

These settings enable you to vary the settings in Audio to ON/OFF, allow you to put the vibration mode to ON/OFF and to increase/decrease the volume levels.


Last Updated on Saturday, 29 December 2012 10:52